New product preview

This is a design that has been hanging around for over a year in a 95% complete state but I have now taken the bold step of finishing it and going into production. It is called the 5ASM2DB and is a 5 socket version of the popular ASM2DB Analogue Systems module to Doepfer bus Adaptor. It is fabricated on a small circuit board and has 3 LEDs that indicate the presence of ±12V and +5V. The 5ASM2DB will be supplied with 4 self-adhesive nylon mounting pillars and a short ribbon cable so it can be placed adjacent to a busboard and linked via the ribbon cable (standard Euro rack 16 pin cable). It is not recommended for use with the Analogue Systems RS-370 as this draws a whoppng 680mA from the 5V rail.

It will be priced at roughly that of 3 ASM2DB Adaptors so the aim is you get 5 for the price of 3; which will be of interest to those of you with many Analogue Systems modules to go in a Eurorack case.

Availability is from mid-September and will also be available as a DIY kit and as a bare PCB for the more adventurous DIYers. Here's an image from the CAD package - it will not be red BTW!

Confused by Cwejman ribbon cables?

I received an order to build some Cwejman standard ribbon cables that were 40cm long. Up until then I had no idea they were different to standard Eurorack cables. So here is what I found out and hopefully this takes the mystery out of it for anyone who is lucky enough to own one of these top modules (and it's also a sales plug - no pun intended).

Eurorack DIY Prototyping Cards Rethink

Post updated 3rd July 2018

The Synovatron Eurorack DIY Kits have now been discontinued. Because many of the kit components are easily available from online retailers it made sense that Synovatron just provides the unique (e.g. PCBs) and harder to source parts (e.g. pot brackets). This provided a great opportunity to reassess the PCB designs rather than just reorder more of the same.

What has emerged is a revised and rebranded Eurorack prototyping solution that is more usable and more elegant than before. The revised product revolves around three PCBs in the Synovatron Proto series: ProtoPotz, ProtoJax and ProtoXp. 

The new Proto PCBs' holes line up with each other to allow each board to be stacked one on the other using header plugs and sockets; allowing power and signals to be routed between boards without resorting to linking ribbon cables. Here is an example board stack-up:

ProtoJax, ProtoPotz and ProtoXp boards stacked together

Examples of headers and sockets used to stack the boards

ProtoPotz

ProtoPotz is the direct replacement for DIY1 PCB (as used in DIY Kit 1 and DIY Kit 2). It is designed to hold up to five 16mm P160KN series pots using brackets. What's new about it?

• Plated-through holes for robustness and convenience, essentially it's a double-sided PCB. 
• Better supports the A-100 bus with dedicated positions for 10 or 16-way open or boxed headers, small electrolytic capacitors and protection diodes (to protect against reverse power connection.

ProtoPotz pot breadboard PCB

Here is the range of pots available from Mouser that Synovatron recommends for use with ProtoPotz:-

ProtoJax

ProtoJax is an evolution of DIY2 and DIY3 PCBs. It is designed to hold up to five Cliff CL1384 3.5mm mono jacks. It is almost identical to ProtoPotz except it has footprints for jacks instead of pots and another two rows of breadboard holes. What makes it more advanced than DIY2 and DIY3 pcbs?

• Larger breadboarding area. 
• Supports the A-100 bus similar to ProtoPotz.

ProtoJax jack breadboard PCB

ProtoXp

ProtoXp is a completely new PCB. It is an eXpansion board designed to add more breadboarding area to ProtoPotz or ProtoJax boards. It's features are:-

• It has a cutout that allows the A-100 bus ribbon cable connector to fit without fouling on the ProtoXp board. 
• The same ±12V power bus structure as the ProtoPotz or ProtoJax boards.

ProtoXp expansion breadboard PCB

DIY2 jack breadboard PCB

 

DIY3 jack breadboard PCB

cvgt MM Buchla Translator ModuleModules

The first cvgt MM modules have started shipping to clients at the top of the pre-order list. If you want to be added to the list then please make contact on synovatron@btinternet.com

I will build in small batches and work through the list in chronological order and will then contact you when your order is ready to ship. Only at that point will I request payment (see prices below). Please note that this does not form any contract between us and you are not in any way commiting yourself to making a purchase until such a time that you make a payment.

 

Initially the cvgt MM will be only available directly from me but if there is enough demand then it is possible they will become available at all the usual distributors in due course. 

The current variants are:-

• Buchla-Euro (round or hex nuts on 3.5mm jacks; please select)
• Buchla-Serge*
• Buchla-BugBrand*
• Buchla-Fenix*

*These are banana socketed variants and only the colour of the banana sockets is different (to match the target system); All are variants (inc. Euro) are to translate from Buchla to 1V/octave systems.

The User Manual is being worked on and will be ready very soon and will posted here in an update. Please checkout the Eardrill website for more info on the ModuleModule concept and other great products from Chris Muir.

Euro variant

Serge variant

Euro (top), Serge (bottom)

cvgtMM - A ModuleModule version of the CVGT1

This project has kept me busy for the past few months. It was suggested some while ago that I do a ModuleModule version of CVGT1 to go in a Buchla (see my earlier post). My initial thoughts were that it was probably not the best solution as front panel space in a ModuleModule is quite restricted and Buchla real-estate is not cheap. However what I didn't consider was that Buchla can also talk to Serge, BugBrand, Fenix etc and Serge users seemed to want this solution. Consequently I set about designing (or redesigning) CVGT1 to fit in a ModuleModule form factor. Chris Muir from Eardrill produced a great interface document which defines just about all I needed to know for designing a ModuleModule (I'll refer to ModuleModule as MM from now on). 

Because of the smaller front panel space I had to lose some features i.e. scaling and offset on the Buchla to other synth CV channel but as it is in a Buchla and will interface to an external 1V/octave synth I've fixed the scaling at 0.8333 (1/1.2) and zero offset. The PCB design allows either 3.5mm jacks or 4mm bananas to be fitted; so one PCB can be configured to for Euro or Serge etc.

Clearly this design has PCBs parallel to the front panel unlike CVGT1 which has them perpendicular hence the change in jack style.  The PCBs had a completely new layout with all front panel related parts on the first board (Front Panel Interface Board) and most of the circuitry on the second (Main Board). Here are some design images of the variants (there are a few very minor tweeks to the graphic since this was drawn and you'll see a few variations in the prototype pics below).

I built a prototype and that's all working nicely. Aside from the new PCB layouts I had to make some changes to the pulse/trigger/gate circuits to run from ±15V rather than ±12V but there were no major changes. Heres a scope image of the Buchla compatible pulse I achieved:-

Here's the prototype with an ink jet printed plastic overlay on the front panel.

All components are conventional through-hole types - I may go over to surface mount if I get more orders than I can personally cope with but think I will still retain through-hole if anyone fancies a kit. You will also notice that the scaling trimmers are front-panel accessible (with a small screw driver) however these are for very fine trimming ±0.5%.

The first pre-production modules will be available in just over a week when the screen-printed panels are in stock. I have a number of interested 'customers' that I will contact soon and will start a pre-order list; please feel free to contact me to get on the list: It will be a 'no-commitment no money up front' arrangement as before with CVGT1 and I will poll all interested parties in turn when I have a module ready to ship to see if you want one. I have not finalised a price yet but guess it will be in the same ballpark as Eardrill's own range of single panel medium complexity MMs.

It will be interesting to see how this takes off, CVGT1 started slow and now there are 200 out there with bags of interest still.  I will do an update in the next week or so. Thanks for reading.

Another custom built Euro to Buchla Translator module

I was recently commissioned by a client to build a custom Euro Buchla interface module, similar to the two I previously built, but with offset switching. The previous two designs both had fixed offset and gain and were intended for use with envelopes, LFOs etc. In other words there was no 1V/octave to 1.2V/octave scaling required just offsetting to ensure the Euro signals stayed in the 0-10V range of the Buchla (you can refer back to my earlier post here).

This module is intended to be used alongside my client's CVGT1 module (which provides the ground reference connection) and adds more CV channels. My client uses Expert Sleepers' SilentWay software for pitch sensitive CV and was not interested in scale conversion as the software does the necessary recalibration however he also wanted the flexibility to be able to interface envelopes, transients and LFOs and so wanted to be able to DC shift signals when he needed to.

The spec was 4 channels of Euro to Buchla (scale of 1, 0V or +5V offset) and 1 channel of Buchla to Euro (scale of 1, 0V or -5V offset); so 10 connectors a 5 switches in 8HP.  

My 8HP prototyping panels proved to be difficult as the existing hole positions meant that the connectors and switches would have been too close to each other plus I only had a few left and found they were scratched; they got binned. I used Schaeffer for a quick-turnaround panel; not cheap but very well made. In a moment of madness I got 5 panels made, including engraving (which the original 2 modules didn't have).

Some Preliminary Work on a ModuleModule Design

ModuleModule CV and gate/trigger translator

This is just a quick post to show what I have been doing with regard to the ModuleModule design I mentioned in my last blog post. More info will unfold over the next weeks but this is just to let several Muffwigglers know that I am progressing their ideas (albeit a bit slowly). These are just a first draft and the design will change. The idea is that there will be a common design that supports either Buchla/Euro or Buchla/Serge; the only difference being the connectors used. It's difficult fitting all I want in the smaller ModuleModule format - perhaps the trim pots will come out and I'll add scale switches as per the CVGT1 - your feedback would be valuable!

CV2 - a sister module for the CVGT1

This is another idea I've been mulling over which will complement the CVGT1 and is intended for non-pitch critical CVs and for audio level translation. Again it's just a preliminary idea and feedback is welcomed.